Follow these simple instructions to use your piercing bar easily:

The first rule for wearing your piercing is to clean your hands and sterilise the bar.

1. Hold the bar in one hand and unscrew the bead attached with the other hand. 
2. Carefully insert the bar into your piercing until it is shown from the other side. Avoid using pressure not to cause any injury.
3. After inserting the piercing, close it by screwing the bead back to the bar.

Please note, this is an externally threaded closure, where the screw is on the bar inserted into the piercing

Gauge size:
The thickness of the bar.

Bar length:
The measurement refers to the part that is inserted into the piercing and it is taken in a straight line between the top base and the ornament.

Please Note, take this guide as a reference only as every individual is unique! There isn't one size that fits all. If you are uncertain or have any doubts about your piercing size please consult a professional piercer.

By following the instructions you can be sure that your body jewellery will look great and remain secure:

Before wearing your piercing, clean your hands and sterilise the bar.

1. Unscrew the front attachment of the piercing (the ornament) from the post
2. With one hand, insert carefully the flat back post from the back of your piercing until the post is popping out from the front side, avoid using pressure to not cause any injury.
3. Gently insert the front part into the post and screw to close.

Gauge size:
The thickness of the bar.

Post length:
The measurement refers to the part that is inserted into the piercing and it is taken in a straight line between the top base and the ornament.

Please Note, take this guide as a reference only as every individual is unique! There isn't one size that fits all. If you are uncertain or have any doubts about your piercing size please consult a professional piercer.

By following these simple steps, you can use your clicker ring with ease and confidence, knowing that it will stay securely in place:

First, before wearing your piercing, ensure you have clean hands and the ring is properly sterilised.

1. Locate the side of the hinged clasp to know which side to open the ring from and gently lift the segment, being careful not to pull the ring from both sides. This will ensure that the ring stays intact and doesn't lose its shape.
2. Once you've lifted the segment, carefully insert it through your piercing, taking care to avoid any discomfort or pain.
3. Finally, bring the two ends of the ring together and listen for the satisfying "click" sound as they snap into place.

Gauge size:
The thickness of the bar.

Inner diameter: The measurement is taken in a straight line from the centre of the ring.

Outer diameter: The measurement is taken in a straight line from the outer edges of the ring.

Please Note, take this guide as a reference only as every individual is unique! There isn't one size that fits all. If you are uncertain or have any doubts about your piercing size please consult a professional piercer.

To ensure that your piercing ring stays in good condition and remains secure in your piercing follow these steps:

First thing when wearing a piercing, wash your hands and ensure the ring is sterilised.

1. Hold both ends of the ring and twist them gently in opposite directions to open it. Avoid pulling the ends apart horizontally, as this can cause the ring to become misshapen and difficult to close properly.
2. When inserting the ring into your piercing, make sure to do so gently and carefully, taking care not to apply too much pressure or force.
3. Once the ring is in place, gently twist both ends of the ring back toward each other to close it securely.

Make sure to take your time and not rush this step, as a poorly closed ring can lead to discomfort or even infection in your piercing.

Gauge size:
The thickness of the bar.

Inner diameter: The measurement is taken in a straight line from the centre of the ring.

Outer diameter: The measurement is taken in a straight line from the outer edges of the ring.

Please Note, take this guide as a reference only as every individual is unique! There isn't one size that fits all. If you are uncertain or have any doubts about your piercing size please consult a professional piercer.

You can easily use BCR piercing ring by following these steps:

Before you wear your piercing, clean your hands and sterilise the ring properly.

1. Hold the ring in one hand and the bead in the other hand and gently pull the ring and bead apart in opposite directions until the bead pops out. This will create a small space where the bead was.
2. Carefully insert the ring into your piercing.
3. Once the ring is in place, squeeze both ends of the ring together with the bead in between until the bead snaps back into place. This will secure the ring in your piercing.

It's important to be gentle and careful when inserting and closing a captive bead ring to avoid any discomfort or injury. If you experience any pain or difficulty, seek assistance from a professional piercer.

Gauge size:
The thickness of the bar.

Inner diameter: The measurement is taken in a straight line from the centre of the ring.

Outer diameter: The measurement is taken in a straight line from the outer edges of the ring.

Please Note, take this guide as a reference only as every individual is unique! There isn't one size that fits all. If you are uncertain or have any doubts about your piercing size please consult a professional piercer.

Keep your piercing ring secured and in a good condition by following these steps:

First thing, wash your hands and ensure the ring is sterilised.

1. Carefully release the ring from the bead by gently pulling it apart.
2. Hold both ends of the ring and twist them in opposite directions to open it. Make sure you do not spread the ends apart to open the ring as it may distort its shape.
3. Once the ring is open, gently insert it into your piercing. Make sure it is inserted correctly and comfortably.

4. Finally, to close the ring, twist both ends back towards each other and press the tip of the ring inside the bead to secure the bead. Make sure the bead is properly secured and not loose.

Gauge size:
The thickness of the bar.

Inner diameter: The measurement is taken in a straight line from the centre of the ring.

Outer diameter: The measurement is taken in a straight line from the outer edges of the ring.

Please Note, take this guide as a reference only as every individual is unique! There isn't one size that fits all. If you are uncertain or have any doubts about your piercing size please consult a professional piercer.